FAQ
All our equipment is designed according to international environmental and sanitary safety standards, the equipment is certified, and each installation is made based on the needs of the customer. The equipment must be used in accordance with the objectives and initially agreed plans for the amount and type of waste to be disposed of, if the operating requirements are met, the output will be environmentally friendly emissions that meet the requirements of international standards and approved by a positive conclusion of state expertise.
Fuel is a major resource that requires a financial investment, but our designers are constantly innovating in incinerator design, including the automated control system, with the goal of significantly reducing fuel costs. If the automated incinerator control is used competently, the economic costs are minimized, which in turn increases the cost-effectiveness of the thermal utilization process itself.
Waste in today's world is a real, large-scale problem. People produce huge amounts of garbage, landfills have long been overcrowded. The landfills themselves are dangerous due to the high emission of greenhouse gases, nitrogen oxide, non-methane organic compounds and other hazardous elements, atmospheric precipitation leaches poisonous chemicals that get into groundwater contaminating groundwater systems. Studies have shown that waste incinerators are less polluting than landfills.
Modern recycling equipment can significantly reduce the amount of waste by:
- reducing the area for landfills and burial sites;
- use of recycling products: ash, thermal energy, etc.;
- environmental safety of the process itself.
Thermally degradable waste is incinerated. The list itself, with a detailed explanation of the types of waste suitable for thermal disposal, is presented in the SEE for the equipment we produce.
Each type of lining has its own nuances in use. About this in more detail can tell you one of the specialists of our company: +7 800 550 69 90
Lining can be changed depending on the needs of the customer, it affects the type of waste, the climatic conditions of operation of the incinerator, etc.nuances. The chamber for recycling and decontamination of waste can be designed according to the mode and operating conditions.
It is important to comply with all regulations and rules of operation of the equipment, follow the enclosed operating manual, and competent operation depends largely on properly selected personnel, which in turn we can train, explain all the processes and nuances occurring inside the equipment.
The main argument in answering this question is the law "On licensing certain types of activities" - the collection, transportation, processing, disposal, neutralization of waste is subject to licensing.
First of all, you can always contact our competent specialists for detailed advice and assistance in equipment selection: +7 800 550 69 90
When choosing an incinerator it is necessary to focus on the type of waste that you plan to dispose of, the volume per day, the size at a single load, which will allow to understand what size loading window will be needed, which in turn will determine the required capacity of the equipment, as well as the climatic conditions of the incinerator. In addition, it is important to understand in favor of which fuel you are ready to make your choice.
Our specialists will make all the necessary calculations for delivery, installation, commissioning and, if necessary, training of personnel. For more information please call: + 7 800 550 69 90
BRENER brand insiners work even in the most extreme conditions. All equipment is manufactured according to customer requirements, all parameters are taken into account, including climatic conditions.
Each type of lining has a number of advantages and disadvantages and is chosen individually according to the purpose and operating conditions of the incinerator.
Our company’s specialists will help you select the best option for the refractory lining of the incinerator according to your technical specifications.
Refractory lining can be made of: refractory bricks of different brands, refractory concrete, as well as multilayer (combined) lining.
Electricity is necessary for the operation of burners and for automation.
Diesel fuel, main gas, liquefied gas, and fuel oil can be used as fuel.
Ashresidueis unloaded through special ash hatches or a loading hatch, depending on the selected model.
Yes, this is possible (optional)
In case of a power outage during the combustion process, the operator needs to switch to a backup energy source (an electric generator, for example). If this is not possible, it’s necessary to remove the burners from the burner ports to prevent them from getting damaged.
Is it possible to monitor it continuously and send real-time data to the Ministry of Natural Resources (this is required somewhere)?
The measurement and control of exhaust gases is done with the help of gas analysis equipment, and this option is available.